0102030405
Rock Soil Vacuum Saturation Test Device
Equipment composition
The Vacuum Saturation Test Device consists of a pump, air valve, vacuum gauge, and saturation cylinder.
This apparatus is made of stainless steel and features a large size (300*300) and light weight.
This Vacuum Saturation With Vacuum Pump Testing Equipment is a vacuum saturation cylinder device manufactured according to the "Sample Preparation and Saturation" chapter of GB/T50123-1999 Geotechnical Testing Methods standard.
TECHNICAL PARAMETER
1. Power Supply Voltage: 220V±10%
2. Pump Power: 150W
3. Pressure Range: 0~-96kPa
4. Saturation Cylinder: φ400×400mm
Test Requirements
When using this apparatus to saturate soil samples, according to GB/T50123-1999, load the sample and connect the apparatus to the vacuum pump (vacuum pump) using a vacuum hose (accessory). Before connecting the power supply:
1. First, close both valves on the "cover" (one vacuum valve, one water injection valve).
2. Apply slight pressure to the cover, start the vacuum pump, and slowly open the vacuum valve (opening the valve too quickly will cause the vacuum pump to spray oil). At this time, the vacuum pressure gauge will show a vacuum value, indicating that the apparatus is working normally.
description2