Automatic potable rock direct shear testing apparatus
Instrument reading value
This type uses a manual hydraulic pump for pressurization, and the hydraulic pump instrument reads the MPa value for normal and shear loading strength values. The kN value is selected through a calibration conversion table. Normal and shear displacement deformations are manually read using a dial gauge. It mainly consists of normal loading device, horizontal shear loading device, shear box, displacement device (optional) accessories, etc.
Technical parameters
1. Loading method: manual hydraulic pump
2. Shear ultimate load: 300kN ± 10N
3. Normal ultimate load: 300kN ± 10N
4. Shear piston stroke: 80mm
5. Normal piston stroke: 80mm
6. Suitable sample size: This instrument is only suitable for cylindrical and cubic specimens
Diameter: 100mm × 100mm; 50mm×50mm； 25mm×25mm
Side length: 100mm × 100mm; 50mm×50mm； (Optional)
Alternatively, 150mm × 150mm × 75mm rock and concrete bonding surface shear and specimen forming test molds can be selected
7. Normal and shear deformation of test piece: Magnetic gauge holder micrometer 0-10mm, accuracy 0.001mm
8. Strength value: Mpa value can be directly read out through a hydraulic gauge, and KN value can be selected through a calibration table
9. Including packaging box 450kg
Automatic data collection
This type uses a manual hydraulic pump to load normal and shear forces, and data acquisition software monitors, collects, and stores normal and shear force values and displacement deformation in real time, forming graphics. The data can be freely exported for future data analysis. It mainly consists of a multi-channel acquisition instrument, computer data acquisition software, normal loading device, horizontal shear loading device, shear box, force sensor, displacement sensor, and corresponding accessories.
Features: Real time data collection, saving manpower and time.
Software and data acquisition functions:
Real time collection, monitoring, and recording of force values, displacement deformation, and parallel curve graphics;
Can achieve multi-channel collection of force values and displacements;
The experimental data can be exported for editing;
The test time can be preset arbitrarily, and the test will automatically stop when the time is up;
The sampling and storage time period can be set arbitrarily
Technical parameters
1. Loading method: manual hydraulic pump
2. Shear ultimate load: 300kN ± 10N Accuracy: 0.01KN
3. Normal ultimate load: 300kN ± 10N Accuracy: 0.01KN
4. Displacement deformation amount
Shear displacement sensing: 0-10mm accuracy: 0.001mm
Normal displacement sensor: 0-10mm accuracy: 0.001mm
5. Shear piston stroke: 80mm
6. Normal piston stroke: 80mm
7. Suitable sample size: This instrument is only suitable for cylindrical and cubic specimens
Diameter: 100mm × 100mm; 50mm×50mm； 25mm×25mm
Side length: 100mm × 100mm; 50mm x 50mm (optional)
Alternatively, 150mm × 150mm × 75mm rock and concrete bonding surface shear and specimen forming test molds can be selected
8. Voltage: 220V, frequency 50Hz
9. Industrial control computer used in conjunction with data acquisition device
description2